![]() ![]() Apply product on dry substrates when air and surface temperatures are between 35°-90☏ (2°-32☌) and will remain between 35°-90☏ (2°-32☌) for at least 4 hours after applying.For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR MARQUEE, if needed.Lock in stains with the first primer coat if necessary, apply a second primer coat of BEHR MARQUEE. Use BEHR MARQUEE paint as a primer for repaired or uncoated surfaces, including woods that contain tannins and heavily stained areas (two primer coats required for redwood and cedar).Allow new stucco, plaster and masonry to cure for 30 days before painting.Caulk windows, doors and other openings.Scuff sand or degloss smooth or glossy surfaces. Remove mildew stains with a mildew stain removing product. Wash off dirt, grease and chalk with detergent and/or powerwash.Countersink nailheads, fill and sand smooth. Use on properly prepared and cleaned coated and uncoated Exterior surfaces.Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. ![]() LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. When applying to vinyl, color choice must be the same color or lighter than the existing color.After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.Cooler temperatures or higher humidity may prolong drying time. On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.Certain colors may require more than one coat for complete hide.Do not thin if using a roller or brush however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.On rough surfaces, use a high quality 3/4-1” nap roller cover.On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter). ![]() Intermix containers of same product to ensure color and sheen uniformity.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |